USCG issues safety alert for ensuring proper configuration of DSC-equipped radios

United States Coast Guard has issued a marine safety alert for ensuring proper configuration of Digital Selective Calling (DSC)-equipped radios.

The document was published on 02 March 2023.

This Safety Alert is intended to remind marine radio users of the importance and value of properly configuring their Digital Selective Calling (DSC)-equipped Very High Frequency (VHF) radios to enable them to function properly in an emergency situation.

When properly installed, DSC allows the mariner to hit the red DSC button in an emergency, resulting in the vessel’s geographic coordinates and registered Maritime Mobile Service Identities (MMSI) number to be transmitted to nearby DSC-enabled vessels and shore-based VHF towers.

The Coast Guard strongly recommends that vessel owners, operators, and crewmembers with DSC-equipped VHF radios:

• Obtain and properly register an MMSI number. For information on obtaining or registering an MMSI number, see this webpage.
• Ensure that the GPS and DSC-equipped radio are interconnected. All DSC-equipped radios, and most GPS receivers, have an NMEA 0183 two-wire data protocol which allows for any model of GPS to be successfully interconnected to any radio model, regardless of manufacturer. Before interconnecting the radio & GPS, one should consult the owner's manuals. For more information, visit this website.
• Confirm proper operation of the radio equipment. Testing procedures for DSC-equipped radio can be reviewed in Marine Safety Information Bulletin (MSIB) 20-20 Change 1.
• DSC functionality or operations questions may be submitted to the U.S. Coast Guard Navigation Center on its Contact Us webpage.

For more information, please see the documents below (available only to subscribers):

RELEVANT DOCUMENTS:

Ensuring Proper Configuration of Digital Selective Calling (DSC)-Equipped Radios

Performing a VHF Marine Radio Check